Wednesday, January 7, 2015

Laptop Charger

Assignment 1

My laptop charger is quite a big bigger than your average charger, so I'm going into this a with a little apprehension regarding how much money my laptop is consuming.  That being said, part of the beauty of a dorm room is you don't have to pay the electricity bill, so I guess I can just say this is my tuition doing work.  I've attached a picture here to give the reader an idea of what I mean when I say "bigger". (Expo marker for scale)

You could build a house out of these things

Now that we've established my charger's size its time to jump right into its specs.  On the back of the brick lives the sticker off of which I intend to get my information.
Lots and lots of logos and symbols I don't understand...
This sticker has a whole lot of logos/symbols/words I don't understand, but all I really care about is its input/output, which it lists in the top left.  It says that the charger takes an input of 100-240 Volts at 4.4 Amps and outputs 19.5 Volts at 16.9 Amps.  Using Ohms Law (V = I*R) we can calculate the resistance of the charger, our output voltage is 19.5V at 16.9A so 19.5 = 16.9 R, so R = 19.5/16.9 = 1.15Ω.

Using these numbers we can do a couple calculations which will give us the total power usage of the charger.  Since we know Power = Voltage * Amplitude we can take the output of 19.5 volts and 16.9 amps and calculate 19.5 * 16.9 = 329.55 watts.  Converting this to kilowatts gives us 0.32955 kW.  So my charger uses 0.32955 kWh.

I went to chooseenergy.com, a useful website that shows you kWh price ranges, and put in the zip code for Hopkins.  It looks like a residential building is charged around 0.09$ (or 9 cents) per kWh, so my charger uses 0.32955 kWh * 0.09$/kWh = 0.03$.  So my charger uses 3 cents per second.

Ultimately that's not as bad as I was expecting, until I take a look at my suitemate's blog and see that he's using a little bit more than half a penny per hour.

1 comment: